It can be difficult to clean up after a flooded basement. Adding to the cost of repairs makes sense. It keeps your home dry and free of mold, and it also prevents floodwater from damaging your basement floor and walls.
There are three options to waterproof the basement. It is possible to waterproof the interior or exterior. Let’s see what each entails.
Waterproofing the Basement Interior
The first thing to do to prevent future water damage is to seal the interior. The process starts with opening a trench. A French drainage system is installed within the trench to direct the water to the pump. The trench is sealed. Water can get into the basement if cracks are not sealed.
They can’t stop flooding basement waterproofing in the long term, but they can close cracks on walls, floors and ceiling to keep water out. The threats posed by floods, including water damage, will be eliminated by submerging the pump.
A common technique in basement waterproofing is concrete breaking. It can be used to find leaks in the basement and walls of the foundation. For an amateur, this is hard and risky work, but for experts, it is a relatively easy repair that takes no time.
It can be hot and humid in Virginia during the summer months. If there is too much humidity in the air, you may want to install a dehumidifier. It will bring down the levels in your basement. Reducing the amount of time you have to run your air conditioner will help.
Don’t forget to install a basement grate drain pipe to keep flooding out of your entryway.
Waterproofing the Basement Exterior
The perimeter wall and the soil surrounding the basement are always at risk. There are a lot of signs that you have a problem with water. It is possible to keep the basement dry, but it is also possible to keep the home free of stains, mold, and odors. External drainage will keep water out of your house.
The first thing to do to waterproof the exterior is to remove water from the basement and foundation walls. You will need to install the gutter and the downspouts. Installation is simple and will not cause a lot of noise. Make sure it works properly if it is in your possession.
Next, you need to dig around your foundation and install a waterproof system. This will make it easier for water to go down to the drain below the foundation. Water doesn’t collect around the perimeter if it is sloped. If that helps, change the slope around the house.
If you have a driveway, you can channel the water away from the house. It’s important to keep debris and leaves out of your house.
Flood water can cause problems in the basement.
It is the worst nightmare for a homeowner. A damp basement can cause wood to rot and metal to rust, as well as creating good conditions for mold and pests to thrive. It can cost thousands of dollars to fix water damage. Why wait until your basement floods?
All of the above problems can be avoided by the exterior of your basement. Do not attempt a do it yourself solution to your basement. We encourage you to use interior and exterior basement waterproofing solutions.
You never know what the future holds for you. One day, you may wake up to floodwater in your basement. Internal and external basement drainage systems are the best for this purpose.
If you don’t know what to do with a basement that is cold, damp and musty, contact your local basement waterproofing expert. We will recommend proven solutions for your house.